EVAPORATIVE COOLERS

ACX SERIES

Centrifugal Evaporative Condensers

Equipped with centrifugal fans at the base and on the dry air side. Can be installed indoors. Good option for installations of Air Conditioning and Industrial Process Cooling and low acoustic requirements. Easy assembly of Sound Attenuators at the inlet/outlet air discharge channels. Serpentine coils are manufactured in steel tubing and the entire assembly is hot-dip galvanized after fabrication. (Stainless steel is an option)

81 Models with nominal capacities from 1,2 to 185 l/s.

ACX - Construction Details

ACL SERIES

Low Profile Evaporative Coolers

Equipped with centrifugal fan in monocell unit and produces low accoustic levels. Good option for installations of Air Conditioning and Cooling in Industrial Environments. Serpentine coils are manufactured in steel tubing and the entire assembly is hot-dip galvanized after fabrication. (Stainless steel is an option)

29 Models with nominal capacities from 1,2 to 185 l/s.

ACL - Construction Details

AMX SERIES

Axial Pressurized Evaporative Coolers

Equipped with axial fans and suitable for Industrial Enviroments. Serpentine coils are manufactured in steel tubing and the entire assembly is hot-dip galvanized after fabrication. (Stainless steel is an option)

16 Models with nominal capacities from 52 to 190 l/s.

AMX - Construction Details

AMA Series

Axial Evaporative Coolers

Equipped with axial fan and manufactured in fiberglass reinforced polyester (FRP), screws and profiles in Stainless Steel AISI 304 or UNIVAC Corrosion Protection System. A good option for cooling in Industrial Processes due to low electrical power and particularly the absence of corrosion. Serpentine coils are manufactured in steel tubing and the entire assembly is hot-dip galvanized after fabrication. (Stainless steel is an option)

135 Models with nominal capacities from 2,5 to 168 l/s.

AMA - Construction Details

AMS SERIES

Silent Axial Evaporative Coolers (Closed Circuit)

Equipped with Axial Fans and manufactured in fiberglass reinforced polyester (FRP), screws and profiles in stainless steel or UNIVAC System.

THREE STRONG POINTS:
1 - STOP TO CORROSION - LONG LIFE
2 - LOW ACOUSTIC LEVEL
3 - LOW ENERGY CONSUMPTION

Serpentine coils are manufactured in steel tubing with galvanizing after manufacture. (Stainless steel is an option). A good option for AIR CONDITIONING and INDUSTRIAL PROCESSES.

143 Models with nominal capacities from 1,9 to 370 l/s

AMS - Construction Details

Sound Attenuators

The acoustic level tunning process of our Evaporative Cooling Units requires an evaluation of acoustical, thermal and cost factors. UNICLIMA can perform this evaluation and propose the appropriate changes to achieve the objectives without sacrificing thermal performance. The Sound Attenuators are designed and manufactured by UNICLIMA. We provide accoustic attenuators for centrifugal fan units (TCX - TCL - ACX - ACL - CCX - CLC) and axial fan units (TLA - TA - ALA - AMA - CLA - CGA)

Containerized for sea

UNIVAC Corrosion Protection System

UNICLIMA developed and introduced in 1996 a UNIVAC SYSTEM. This system is not only a surface treatment, but also provides superior corrosion protection. The UNIVAC SYSTEM extends equipment life and provides a lower cost solution for cases where the equipment has to work in poor water quality, environmental considerations or equipment location. It is notable its resistance to salt spray, chemicals, abrasion, impact, ultraviolet radiation (sun) and thermal shock.

The UNIVAC SYSTEM has the following proceeding:
1) Galvanized steel sheets and coated on both sides with Thermosetting Powder (Polyester Silicon Type),
2) Tightening of all components with screws and nut in stainless, avoiding this way the drilling of the panels after the Treatment of Surface with drills or self-threaded screws.
3) Use of PVC (Polyvinyl chloride) in Drift Eliminators, Water Distribution System, Fill, Tubular Connection, etc.

The combination of these three basic procedures with other small details define UNIVAC SYSTEM which provides a final product with the purpose of evaporative cooling water of high quality.